MTP-MSAP1800 is an intelligent and compact MSAP integrating SDH(STM-1/4/16) and PCM technologies. MTP-MSAP1800 provides four SDH optical ports in transmission side,  each of which can be configured as STM-1, STM-4 or STM-16; and provides  E1, FE, GE and three service slots in access side, service slots are available for dozens of service cards.

MTP-MSAP1800 is an intelligent and compact MSAP integrating SDH(STM-1/4/16) and PCM technologies. MTP-MSAP1800 provides four SDH optical ports in transmission side,  each of which can be configured as STM-1, STM-4 or STM-16; and provides  E1, FE, GE and three service slots in access side, service slots are available for dozens of service cards.

■Chassis Structure

19”×1U, provide 3 service slots, can be inserted in a standard 19-inch cabinet

■Maximum Interfaces

SDH optical port: 4×optical port, STM-1, STM-4 and STM-16 optional

E1 interfaces: 52×E1, 120ohm and 75ohm optional

FE/FX: MAX 16×FE/FX, 16×VCG, each VCG (1~48)×VC12

GE/GX: MAX 4×GE/GX, 4×VCG, each VCG (1~48)×VC12 or (1~7)×VC4 

PCM: MAX 48×FXS/O,  or 24×2/4W, RS232/RS485, etc.

■Ethernet Protocol

Support ITU-T G.7041 GFP-F protocol

Support ITU-T G.7042 VCAT protocol

Support ITU-T G.7042 LCAS protocol

■Support point to point, ring and tangent rings topologies

■Support ring topology protection, switching time ≤50ms

■Support optical paths 1+1 protection, switching time ≤50ms

■Provide abundant alarm  and  status indications

■Support SNMP based  Network  Management  System

■Support NMS channels : DCN, DCC, VC12 and E1

■Support power supplier modules 1+1 hot-backup

■MAX  consumption  is less than 50W

MTP-MSAP1800  has  been  widely  used  in private networks such as power utility, mining, railway, oil, police, military,  government, etc.   

MTP-MSAP1800 is usually deployed  in intermediate node and aggregation node.